The D Series is a single tower desiccant air dryer designed for point-of-use applications. The rust-free powder coated aluminum housing is made in Canada and includes built-in brackets.
DESCRIPTION
The D Series is a single tower desiccant air dryer designed for point-of-use and intermittent flow applications. The wet compressed air enters at the inlet, is first separated due to the off-set inlet creating centrifugal separation to trap water droplets, and subsequently passes around a polypropylene coalescer element, felt pads, and stainless-steel grids to remove solid particulates. The air flows upward through a sewed filtration desiccant bag that acts as a sponge to absorb moisture. Finally, the air flows again through the second filtration stage to eliminate any desiccant dust. This 3-stage system efficiently provides separation, filtration, and drying. It is time to replace the cartridge when the Moisture Gauge indicates saturation. The replacement is fast and mess-free, thanks to the US stainless-steel clamp. The rust-free powder-coated aluminum housing is made in Canada and includes built-in brackets. A superior alternative to Devilbiss DAD 500, Camair CT30, MP Filenco, Van Air Moisture Block.
SPECS
INLET / OUTLET PORTS: 1-1/2'' NPT
AIRFLOW @ 100 PSIG: 150 SCFM
MAXIMUM INLET PRESSURE: 150 PSI
MAXIMUM INLET TEMPERATURE: 100°F (38°C)
CRN: CERTIFICATIONS & PRESSURE RATINGS
PRE-FILLED WITH DESICCANT CARTRIDGE
PRESSURE GAUGES, SAFETY VALVE, AND BALL VALVE INCL.
UNIT WEIGHT: 50 LB
BOX DIMENSIONS: 22 x 12 x 9 PDF
PDF
FAQ
1. How long does the cartridge last?Typically we recommend changing the cartridge at least once to twice every year (or every 2,000 hrs) when used for point-of-use applications with an intermittent flow.2. When do I know when to change the cartridge?Use our moisture indicator HGT-1/4 and replace the cartridge when the R.H. exceeds 80%.3. Can I regenerate the desiccant?We highly recommend replacing the desiccant with a fresh cartridge for optimal performance. However, you may dry the desiccant by emptying the bag and leaving the activated alumina in an oven at 275 F for 4 hours (approximately). Let the desiccant cool down before refilling the bag. Use a commercial stapler to close the bag.
4. How can I extend the life of the cartridge?We recommend draining the tower daily by opening the ball valve or using our automatic timer drain TD-1/4. When there are bulk liquids in the compressed air, a water separator FSD Series installed upstream of the dryer will knock water and prevent the flooding of the cartridge.
5. Can I oversize my air dryer?Yes, oversizing the air dryer will increase the time in between maintenance.
Nano Purification NDM 130 GF PNU D3 Modular Desiccant Air Dryer
Nano NDL 130 GF PNU Modular Desiccant Dryer
Van Air Systems Air Dryer D2 - 7 SCFM - 1/2 Connections - Van Air Inc
Basevac Standard Oil-less Dental Air Compressor D2.5 - 220 2880112
Nano D2 Series Desiccant Air Dryer
We’re getting really sophisticated here, bros. My good friend Scott Ales owner and founder of YoungTimer (an automotive restoration service), has
Nano D2 Series Desiccant Air Dryer
We’re getting really sophisticated here, bros. My good friend Scott Ales owner and founder of YoungTimer (an automotive restoration service), has
Nano D2 Series Desiccant Air Dryer
nano NDL D2 NDL-110-F Heatless Modular Desiccant Air Dryer, 1 in Inlet Connection, 1 in Outlet Connection, 49 in OAH
Nano NDL-110-F Heatless Desiccant Air Dryer
HEATLESS DESICCANT AIR DRYER NANO D-SERIES NDL-010
Desiccant Compressed Air Dryers
Desiccant Air Dryer Systems
3.8m³/min Modular Air Compressor Desiccant Dryer
1 NPT, 232 PSIG, 100 to 240 VAC, Low dew point (-94°F)
nano-purification solutions NDL 100 GF2 LDP, 61 SCFM Desiccant Air Dryer
D2 COMPRESSED AIR DRYER - 7 SCFM - 1/2 CONNECTIONS - AVP, Inc.
Desiccant Air Dryer Toronto or Guelph - Compressed Air International
