12-DFE-8 Dixon Instrumentation Fitting - Stainless Steel Female Elbow - 3/4 Tube OD x 1/2 Female NPT (Pack of 10)

12-DFE-8 Dixon Instrumentation Fitting is a Stainless Steel Female Elbow, and has a 3/4" Tube OD x 1/2" Female NPT. The fitting features double collet (ferrule) swaging action, and is fully interchangeable with Swagelok and Parker A-Lok fittings

Features:
Fully interchangeable with Swagelok® and Parker A-Lok® fittings. Double collet (ferrule) swaging action. Two positive seal points. ASTM material construction. Material: 316 stainless steel. Temperature Ratings: -325 deg. F to 1200 deg. F (-198 deg. C to 648 deg. C)
Installation Instructions:
Cut tubing squarely and clean tube end thoroughly to remove burrs. Insert the tubing into the assembly making sure the tubing seats firm against the shoulder of the body and the nut is finger tight. Tighten the nut with a wrench 1-1/4 turns, while holding the body with a second wrench.
Safety Guidelines:
Never connect, disconnect or remake a fitting with pressure in the system. Make sure all fittings are properly installed. It is not recommended to go beyond the pressure rating of the tubing. Elongation could occur in the tubing, shrinking the wall thickness and cause potential harm. For proper sealing it is recommended that the tubing and fittings be of like material. Always use proper thread lubricant and sealants on tapered pipe threads. Never bleed a system by loosening a fitting.

Suggested Working Pressures
Wall Thickness	.028	.035	.049	.065	.083	.095	.109
1/4	4,000	5,100	7,500	10,100	---	---	---
3/8	---	3,300	4,700	6,600	---	---	---
1/2	---	2,600	3,700	5,000	6,600	---	---
5/8	---	---	2,900	3,900	5,200	6,000	---
3/4	---	---	2,400	3,200	4,200	4,900	5,700

Part Number	Tube OD	Female NPT	Interchanges	Weight (Lbs)
4-DFE-2	1/4	1/4-18	400-8-2	-
6-DFE-4	3/8	1/4-18	600-8-4	-
8-DFE-8	1/2	1/2-14	810-8-8	-
12-DFE-8	3/4	1/2	1210-8-8	-
12-DFE-12	3/4	3/4	1210-8-12	-
16-DFE-16	1	1	1610-8-16	-

8WF8 Dixon Valve Steel W-Series Quick Disconnect 1 Wingstyle

Dixon 1238-12-12 Zinc Plated Steel Hydraulic Pipe Fitting, 90

Dixon Sanitary Fittings Complete, PDF

Dixon Industrial Hose Fittings — HoseWarehouse

Dixon Valve & Coupling - Barbed Hose Fitting: 1/4″ x 3/8″ ID Hose

Dixon Valve & Coupling - Barbed Hose Fitting: 1/4″ x 3/8″ ID Hose

Adapter for connecting two different types of pipe or hose Female National Pipe Taper (NPT) threads and Joint Industry Council (JIC) flare end for

Dixon SFMF1000 Stainless Steel 304 Female Threaded 37 Degree JIC Weld End Hose Fitting, Straight with Nut and Sleeve, 1 Tube OD

Straight Female Weld End Metal Hose Fitting

Elbow for changing flow direction Male SAE threads and male SAE screw threads for connecting two female pipes Zinc-plated steel for strength and

Dixon 1238-12-12 Zinc Plated Steel Hydraulic Pipe Fitting, 90 Degree Elbow, 1-1/16-12 Male SAE O-ring Boss x 1-1/16-12 Male SAE Screw

Danfoss's Eaton Brass Catalog 2018 - Hose Warehouse by Murdock

2881217C (288-1217) Dixon Valve Brass Female 37 Deg. JIC Swivel

Food Equipment Parts - Sanitary Pipe Fittings - Page 8 - Austin

Food Equipment Parts - Sanitary Pipe Fittings - Page 8 - Austin

Female 45°SAE/37°JIC Swivel x Push-on Hose Barb

Dixon Sanitary Fittings Complete, PDF

12-DFE-8 Dixon Instrumentation Fitting - Stainless Steel Female Elbow - 3/4 Tube OD x 1/2 Female NPT (Pack of 10) — HoseWarehouse